uclient手机客户端


DMC manufactures the first line of truly industrial bottled-water coolers. Made of 316L stainless steel, all are designed specifically for corrosive, dusty, hot, humid, and, when necessary, hazardous (explosive) locations.

uclient手机客户端

uclient手机客户端手机注册

When specified, DMC makes units suitable for hazardous-duty (“explosion-proof” or “flame-proof”) conditions.

We use UL-recognized hazardous-duty compressors appropriate for the classification of the area.

DMC offers bottled-water coolers suitable for use in areas classified as any of the following types of locations: NEC Classes I, II, or III, Groups B, C, D, E, F or G, and Division/Zone 2 or 1 and IEC Classes I, IIA, IIB, and IIC Zones 1 and 2. The units will also be temperature-coded T3B.

DMC seals the coolers in the factory for fast and easy installation, and they retain the same corrosion resistance and other harsh-duty features as DMC's standard coolers.

uclient手机客户端官方平台

uclient手机客户端 All corrosion-resistant stainless steel type-316L, inside and outside including interior shelves, mountings and drip basin. Satin finish on all exterior surfaces for an attractive and easily-cleaned lustrous appearance. Bottle-support ring made of durable and corrosion-resistant polypropylene.

uclient手机客户端在线代理 Protected from environment by installation inside NEMA 4 (IP65) or NEMA 4/7/9 enclosure.

uclient手机客户端手机 Self-closing, no-drip. Made from durable and corrosion-resistant polypropylene.

uclient手机客户端手机 Flat-bottom stainless steel basin with approximately 2-1/2 quarts (2.4 liters) useable capacity and polypropylene fittings. Corrosion-protected copper evaporator coil is wrapped around reservoir, insulated with closed-cell elastomer.

uclient手机客户端ios Capillary tube, filter-dryer, two access valves and all other metal tubing protected with either a special epoxy coating (e-coat) with near-zero porosity applied electrostatically and baked or with special enamel paint to protect them from acidic and caustic corrosion.

uclient手机客户端app登录 Three rows deep, sized for high ambient temperatures and high altitudes, and protected against acidic and other corrosion with a special epoxy coating (e-coat) with near-zero porosity applied electrostatically and baked.

uclient手机客户端 Andover Protection Systems’ Model EEG (for 115/60/1) or APS Model EEJ (220-240/50-60/1). These compressors are specifically designed for and recognized by UL (Underwriters Laboratories) for use in hazardous (“explosive”) areas, even those requiring explosion-proof or flameproof equipment.

uclient手机客户端官方平台
Rated Capacity - At water and air temperature of 131° F (55°C) — lower 1/2 gallon per hour of water from 131°F (55°C) to 50°F (10°C) — Note: 131°F water will scald skin; therefore, chiller must lower the water
Capacity at ARI standard conditions - At water and air temperature of 90°F (32.2°C)—lower 0.9 gallons per hour of water from 90°F (32.2°C) to 50°F (10°C) — (produce 50% more cold water than standard units). A.D.A.: Overall, the coolers comply with the requirements of the ADA specification 4.15.2-4   

uclient手机客户端登录首页 Approximately 73 lbs. and 8.6 cubic feet.

Industrial and Hazardous-Duty Bottled-Water Cooler

Download Product Cutsheet

uclient手机客户端官方客户端